SPILL-EX Conveyor Sealing Systems (Skirts) >>>

To seal transfer points and to counteract waste, long rubber sealing strips are generally used. However, these strips barely limit the waste of valuable raw materials, have an irregular lifespan cycle and are difficult to adjust. Replacing and adjusting the strips also takes a lot of time.

SPILL-EX represents the definitive end to nuisance due to pollution and dust at transfer points. The sealing blocks are easy to adjust individually and can be replaced quickly and easily. SPILL-EX does not just eliminate pollution, it also reduces operational and maintenance costs.

1 - Support plate

2 - Rubber sealing blocks

3 - Toothed clamps

SIDE-BTV Conveyor Sealing Systems >>>

When moving the material on a belt conveyor belt, it is usually swirling and separating the small dust particles of the material to be transported. This is mainly the matter of transfer points between conveyors, dumpers, or places where some of the relaxed layer of material dissolves and mixes. This is particularly noticeable for dry, brittle or dusty materials. A very frequent example is coal and power coal with a large fraction of the fraction.

With growing demands on environmental technology requirements, the question of how to eliminate or minimize the dusty dustiness of belt conveyors is at the forefront.

VVV MOST has developed, manufactured and supplied a complete passive dust reduction program for belt conveyors where, besides impact and soothe beds, dustbins and anti-dust screens, the adaptive longitudinal seal of the side guide and hoppers is also included.